“派克固美丽导热凝胶8010”参数说明
是否有现货: | 是 | 认证: | UL |
加工定制: | 是 | 材质: | 凝胶 |
用途: | 导热 | 型号: | 8010 |
规格: | 300CC/支 | 商标: | 固美丽Chomeirics |
包装: | 针筒式 | 热膨胀系数,ppm/K: | 150 |
表观导热系数,W/m-k: | 3.0 | 比重: | 2.7 |
操作温度范围,℃(°F): | -55 - +200(-67 - +392) | 产量: | 10000 |
“派克固美丽导热凝胶8010”详细介绍
THERM-A-GAP GELs are supplied as pre-cured, single component compounds that can be dispensed over the heat generating component.
These unique gel materials result in much lower mechanical stress on delicate components than even the softest gap-filling pads. They are ideal for filling variable gaps between multiple components and a common heat sink.
Thermal gels are silicone-based formulations that are loaded with conductive fillers and are crosslinked to form a low-modulus paste. They are highly conformable and provide low thermal impedance like greases but are designed to overcome the pump-out and dryout issues of grease.
Dispensed Gels in Automotive Electronic Control Unit
(ECU) Application
固美丽导热脂(Thermal Grease)8010
物理特性 颜色 白色
操作温度范围,℃(°F) -55 - +200(-67 - +392)
比重 2.70
导热性能 表观导热系数,W/m-k 3.0
热容,J/g-K 1
热膨胀系数,ppm/K 150
电气性能 体积阻抗, ohm-cm 1014
法规 易燃性等级 V-0
RoHS兼容 是
渗气,%TML 1.33
储存寿命,自装运之日起的储存月数 18
√在炽热部件和散热片或外壳之间采用硅基材料导热
√在电子组件和散热片实际应用中能以多种界面公差进行填充
√可涂布式高配合性材料无需固化过程、混合或冷却
√具有良好的热稳定性,实际上在常规组装按压下无需压力即可变形
√支持需要最低胶层厚度和高导热性材料的高能应用
√是需要返修和野外维修场合的理想选择
These unique gel materials result in much lower mechanical stress on delicate components than even the softest gap-filling pads. They are ideal for filling variable gaps between multiple components and a common heat sink.
Thermal gels are silicone-based formulations that are loaded with conductive fillers and are crosslinked to form a low-modulus paste. They are highly conformable and provide low thermal impedance like greases but are designed to overcome the pump-out and dryout issues of grease.
Dispensed Gels in Automotive Electronic Control Unit
(ECU) Application
固美丽导热脂(Thermal Grease)8010
物理特性 颜色 白色
操作温度范围,℃(°F) -55 - +200(-67 - +392)
比重 2.70
导热性能 表观导热系数,W/m-k 3.0
热容,J/g-K 1
热膨胀系数,ppm/K 150
电气性能 体积阻抗, ohm-cm 1014
法规 易燃性等级 V-0
RoHS兼容 是
渗气,%TML 1.33
储存寿命,自装运之日起的储存月数 18
√在炽热部件和散热片或外壳之间采用硅基材料导热
√在电子组件和散热片实际应用中能以多种界面公差进行填充
√可涂布式高配合性材料无需固化过程、混合或冷却
√具有良好的热稳定性,实际上在常规组装按压下无需压力即可变形
√支持需要最低胶层厚度和高导热性材料的高能应用
√是需要返修和野外维修场合的理想选择